if you want to remove an article from website contact us from top.

    what are you signaling to the drivers behind you when you flash your brake lights?

    James

    Guys, does anyone know the answer?

    get what are you signaling to the drivers behind you when you flash your brake lights? from EN Bilgi.

    Florida CDL Handbook

    2.5.1 - Signal Your Intentions Other drivers can't know what you are going to do until you tell them. Signaling what you intend to do is important for

    Florida CDL Handbook: Communicating

    Table of Contents

    2. Driving Safely

    2.1. Vehicle Inspection

    2.2. Basic Control of Your Vehicle

    2.3. Shifting Gears 2.4. Seeing 2.5. Communicating

    2.6. Controlling Speed

    2.7. Managing Space 2.8. Seeing Hazards

    2.9. Distracted Driving

    2.10. Aggressive Drivers/Road Rage

    2.11. Driving at Night

    2.12. Driving in Fog

    2.13. Driving in Winter

    2.14. Driving in Very Hot Weather

    2.15. Railroad-highway Crossings

    2.16. Mountain Driving

    2.17. Driving Emergencies

    2.18. Antilock Braking Systems (ABS)

    2.19. Skid Control and Recovery

    2.20. Accident Procedures

    2.21. Fires

    2.22. Alcohol, Other Drugs, and Driving

    2.23. Staying Alert and Fit to Drive

    2.24. Hazardous Materials Rules For All Commercial Drivers

    2.5.1 - Signal Your Intentions

    Other drivers can't know what you are going to do until you tell them.

    Signaling what you intend to do is important for safety. Here are some general rules for signaling.

    Turns. There are three good rules for using turn signals:

    Signal early. Signal well before you turn. It is the best way to keep others from trying to pass you.

    Signal continuously. You need both hands on the wheel to turn safely. Don't cancel the signal until you have completed the turn.

    Cancel your signal. Don't forget to turn off your turn signal after you've turned (if you don't have self-canceling signals).

    Lane Changes. Put your turn signal on before changing lanes. Change lanes slowly and smoothly. That way a driver you didn't see may have a chance to honk his/her horn, or avoid your vehicle.Slowing Down. Warn drivers behind you when you see you'll need to slow down. A few light taps on the brake pedal -- enough to flash the brake lights -- should warn following drivers. Use the four-way emergency flashers for times when you are driving very slowly or are stopped. Warn other drivers in any of the following situations:

    Trouble Ahead. The size of your vehicle may make it hard for drivers behind you to see hazards ahead. If you see a hazard that will require slowing down, warn the drivers behind by flashing your brake lights.

    Tight Turns. Most car drivers don't know how slowly you have to go to make a tight turn in a large vehicle. Give drivers behind you warning by braking early and slowing gradually.

    Stopping on the Road. Truck and bus drivers sometimes stop in the roadway to unload cargo or passengers, or to stop at a railroad crossing. Warn following drivers by flashing your brake lights. Don't stop suddenly.

    Driving Slowly. Drivers often do not realize how fast they are catching up to a slow vehicle until they are very close. If you must drive slowly, alert following drivers by turning on your emergency flashers if it is legal. (Laws regarding the use of flashers differ from one state to another. Check the laws of the states where you will drive.)

    Don't Direct Traffic. Some drivers try to help out others by signaling when it is safe to pass. You should not do this. You could cause an accident. You could be blamed and it could cost you many thousands of dollars.

    2.5.2 - Communicating Your Presence

    Other drivers may not notice your vehicle even when it's in plain sight. To help prevent accidents, let them know you're there.

    When Passing. Whenever you are about to pass a vehicle, pedestrian, or bicyclist, assume they don't see you. They could suddenly move in front of you. When it is legal, tap the horn lightly or, at night, flash your lights from low to high beam and back. And, drive carefully enough to avoid a crash even if they don't see or hear you.When It's Hard to See. At dawn, dusk, in rain, or snow, you need to make yourself easier to see. If you are having trouble seeing other vehicles, other drivers will have trouble seeing you. Turn on your lights. Use the headlights, not just the identification or clearance lights. Use the low beams; high beams can bother people in the daytime as well as at night.When Parked at the Side of the Road. When you pull off the road and stop, be sure to turn on the four-way emergency flashers. This is important at night. Don't trust the taillights to give warning. Drivers have crashed into the rear of a parked vehicle because they thought it was moving normally.

    If you must stop on a road or the shoulder of any road, you must put out your emergency warning devices within ten minutes. Place your warning devices at the following locations:

    If you must stop on or by a one-way or divided highway, place warning devices 10 feet, 100 feet, and 200 feet toward the approaching traffic. See Figure 2.8.

    If you stop on a two-lane road carrying traffic in both directions or on an undivided highway, place warning devices within 10 feet of the front or rear corners to mark the location of the vehicle and 100 feet behind and ahead of the vehicle, on the shoulder or in the lane you stopped in. See Figure 2.9.

    Use Your Horn When Needed. Your horn can let others know you're there. It can help to avoid a crash. Use your horn when needed. However, it can startle others and could be dangerous when used unnecessarily.

    Source : www.lowestpricetrafficschool.com

    How To Use Car Indicators and Other Signals

    How To Use Car Indicators and Other Signals - Using indicators,brake lights, hazard warning lights, headlights and the horn

    Making & Responding to car Signals

    A car has several signalling devices - indicators, brake light, hazard warning light, headlights, reversing light and the car horn. These signalling devices are used by drivers to communicate to other road users what they intend to do. They help drivers "read the road". Signals give a warning to other road users that you intend to make a manoeuvre.

    Giving appropriate signals at the correct time and place and correctly interpreting the signals of other road users is important for the safety of all road users.

    Your signals must be given in good time before you start your manoeuvre and for long enough for their meaning to be clear to other road users. Don't signal too soon as this could confuse other road users.

    Indicator Lights

    Indicator lights are amber in colour and can be located at the front, the rear and sometimes at the side of the car on both the left and right-hand sides. You use your indicators to show an intended change of direction, whether turning left or right or moving out into traffic.

    You only need to use your indicators if other road users (vehicles, cyclists or pedestrians) are visible.

    Use them in good time, giving other road users plenty of time to react and adapt to your signal.

    Once you have completed the manoeuvre, make sure the indicator has been cancelled, or you may confuse other road users.

    Hazard Warning Lights

    When you turn on your hazard warning lights, every indicator the car has begins to flash. You turn on your hazard warning lights when you need to warn other road users of a hazard. This hazard could be your car or an obstacle on the road.

    Turn on your hazard lights if your car has broke down, is obstructing traffic, or to warn other road users of a hazard ahead.

    Never use them when parking dangerously, illegally or whilst towing.

    Brake Light Signal

    When you press the brake pedal, two rear warning lights are activated. This signals to traffic behind you that you are slowing down. The brake lights are coloured red. When driving at night it is important to remember that standard rear lights are also red.

    Although brake lights are brighter than the standard rear lights, you still need to pay close attention to make sure you see brake lights activated.

    Another situation where brake lights can be used to give a useful warning is when stationary at road works or traffic lights, especially when in low light or low visibility conditions. When a car approaches you from the rear, press your brake pedal to activate the brake light. This will warn the driver of your presence.

    Flashing Your Headlights

    According to the Highway Code, the only valid use of flashing your headlights is to warn another road user of your presence.

    Flashing your headlights is useful when the horn wouldn't be heard, such as when driving at speed.

    Never flash your headlights to try and intimidate other road users, and never flash your headlights to give instructions. It is common for drivers to use the headlight flash as a signal to tell another road user that the way ahead is clear. However, it is advisable such signals are ignored. How can you be certain that the way ahead is clear or that this is what the flash was communicating? If you were to respond to flashing headlights this way or if you were to flash a driver to tell them that the way ahead is clear on your driving test would fail the test.

    Arm Signals

    You can give arm signals when mechanical signals such as indicators or brake lights have failed. You do this by extending your right arm through the side window and for:

    Stopping or slowing down - keep your right arm still.

    Stopping or slowing down - move your right arm up and down.

    Turning or moving left - move your right arm in a circular motion.

    The Horn

    Use of the horn should be limited to warning other road users who have failed to see you of your presence. Avoid aggressively sounding the horn, and remember it is illegal to use your horn whilst your car is stationary or in a built-up area between 11.30 pm and 7.00 am, except when another moving vehicle poses a danger to you.

    While driving, you should never take for granted that every signal you see is being accurately used to show a driver's intentions. Many signals are poorly used. Be cautious and wait for a secondary sign that the signal is for real.

    For instance, you're waiting to turn left out of a junction. A vehicle is approaching from the right and is signalling that it intends to turn left into the junction you are waiting at. You could pull out and continue on your way, but what if the signal is false or has been activated by mistake? To make sure the signal is for real, wait for confirmation, such as the vehicle slowing or starting to make the turn.

    Reversing Signal

    When a car is put into reverse gear either one or two white lights are activated at the rear of the car.

    When Taking Your Driving Test

    The driving test examiner will expect you to

    Source : driving-test-success.com

    Signalling Flashcards

    Start studying Signalling. Learn vocabulary, terms, and more with flashcards, games, and other study tools.

    Signalling

    5 ways to signal your intention

    Click card to see definition 👆

    Indicators Position of the car Hazard lights Brake lights Arm signals

    Click again to see term 👆

    Position of the car

    Click card to see definition 👆

    When you're coming up to a junction, reinforce the direction you're going to take by positioning your car. If you're turning onto a right-hand side road, move towards the right side of your lane.

    That'll let everyone know what you're going to do and let other people move into position if they're turning the other way.

    Click again to see term 👆

    1/6 Created by sharinap

    Terms in this set (6)

    5 ways to signal your intention

    Indicators Position of the car Hazard lights Brake lights Arm signals Position of the car

    When you're coming up to a junction, reinforce the direction you're going to take by positioning your car. If you're turning onto a right-hand side road, move towards the right side of your lane.

    That'll let everyone know what you're going to do and let other people move into position if they're turning the other way.

    Hazard Lights

    Turning on your hazard lights will make both your indicator lights flash at the same time. You should only use these when you are a hazard to other road users or you want to make another driver aware of a hazard on the road.

    Brake lights

    When you brake your brake lights will give drivers behind you plenty of warning that you are slowing down.

    These red lights will automatically turn on at the back of your car whenever you use your foot brake. Try not to use them at traffic lights as they may dazzle the person behind you - put on your handbrake for more than a short pause.

    Arm signals

    Arm signals can be useful in slow traffic when other drivers may not be able to see your indicators.

    When to signal Before moving off Before overtaking

    Before turning into a road

    Before pulling over

    Before and on a roundabout

    Sets with similar terms

    CDL subsection 2.2 and 2.3 test your knowledge

    8 terms daledango

    Driver's Ed Chapter 6

    17 terms sugarkat54

    Driver's study guide

    75 terms kobe_671

    Vulnerable road users

    65 terms leanne892

    Other sets by this creator

    Investment Funds 12 terms sharinap Derivatives 14 terms sharinap Bonds 3 terms sharinap Equities 21 terms sharinap

    Other Quizlet sets

    Soc Exam 3 study guide

    144 terms cmairone15

    Exam 3 review- 19, 20, 21

    70 terms Soph10126 bio exam 2 37 terms awesomeEllenKeaton

    Psychology 149 Exam 3

    72 terms JimmyChiha

    Related questions

    QUESTION

    Provided the vehicle is kept off the road, the Statutory Off-Road Notification (SORN) is valid until...

    2 answers QUESTION

    Two common errors to avoid when backing:

    9 answers QUESTION

    If you have auto insurance, can you still be sued after an collision that was your fault

    2 answers QUESTION

    How far apart should the hoist arms be when preparing to lift a car?

    4 answers 1/4

    Source : quizlet.com

    Do you want to see answer or more ?
    James 1 month ago
    4

    Guys, does anyone know the answer?

    Click For Answer