if you want to remove an article from website contact us from top.

    all-heatexchangers.com removable plate and shell heat exchanger

    James

    Guys, does anyone know the answer?

    get all-heatexchangers.com removable plate and shell heat exchanger from EN Bilgi.

    Which Heat Exchanger Is Best? The Three Main Types Explained...

    There are three common kinds of heat exchangers. This article explains the basic differences and helps you decide which is appropriate for your application.

    Which Heat Exchanger Is Best? The Three Main Types Explained...

    August 30, 2019 | by Paul Mueller Company Engineering Staff

    Heat exchangers all work by passing a hot fluid and a cold fluid across opposite sides of a piece of metal. The heat from one fluid passes across the metal (which is thermally conductive) into the other fluid without the fluids making contact. High fluid velocity, high turbulence, high surface area and a large temperature differential all contribute to more efficient heat transfer. However, different designs are more efficient than others depending on the application.

    There are three common kinds of heat exchangers. They can all be effective in a variety of heat transfer applications, but optimizing efficiency, cost and space depends heavily on the particular process in which the heat exchanger is installed. This article explains the basic qualitative differences between common heat exchangers to help you decide which is most appropriate for your application.

    Shell and Tube Heat Exchangers

    Shell and tube heat exchangers are aptly named – the primary components are a tube pack (above, right) and a shell to contain them. One fluid goes through the tubes, and the second goes through the larger shell, surrounding the tubes. The prototypical shell and tube heat exchanger has only one inner tube, and is typically used to teach engineering students the basic concept of a heat exchanger. However, in practice, a pack of smaller tubes is much more effective because it greatly increases the heat transfer surface area (and has a minor positive effect on turbulence to boot).

    The shell and tube heat exchanger in the photo above has about twelve times the efficiency than a hypothetical single-tube heat exchanger of the same size. However, there is a disadvantage to smaller tubes – if the fluid in your application is very viscous or has particulates, it can foul up the tube and undermine the heat transfer process.

    Shell and tube heat exchangers dominated the heat exchanger market up until the latter part of the 20th century, as plate heat exchangers began to replace them in many industrial and most HVAC applications.

    Due to their simple design, they also hold a prominent place in engineering curricula around the globe. They have many advantages that helped them earn those achievements. First, they’re relatively cheap – they’re essentially just a bunch of tubes. Also, due to their hydro- and aerodynamic design, they can support higher operating temperatures and pressures than your typical plate heat exchanger, which, due to its compactness, has to change the direction of flow many times per cycle. This also means that the pressure drop from input to output is smaller, which can save on energy costs.

    Despite the advantages, plate heat exchangers are becoming preferred due to better heat transfer (we’ll see why in a moment), easier maintenance and cleaning, modularity and compactness.

    Plate and Frame Heat Exchanger (Plate Heat Exchangers)

    Plate heat exchangers are constructed with a series of plates held together in a large frame. There are two inputs and two outputs, and the spaces between plates alternate between the two liquids (hot, cold, hot, cold, etc. as shown above, right). This design lends itself to very high heat transfer efficiency due to large surface area – much higher than a shell and tube heat exchanger taking up similar space. Plate heat exchangers are also much easier to clean and maintain, because they’re designed to be relatively easy to disassemble and inspect. Also, if there is a defect in a plate, you can simply remove two plates and put the unit right back in service at slightly lower capacity while you wait for replacements. Shell and tube heat exchangers do not share this luxury.

    While all plate heat exchangers have corrugated plates, they can differ by how they seal the plates together. In ascending order of leak resistance (and price), plate heat exchangers can be gasketed, brazed or welded. Gaskets, while more susceptible to failure under pressure, are inexpensive and easy to replace. They also offer the indispensable benefit of modularity – a gasketed plate heat exchanger can be completely disassembled, and plates can be added to increase capacity at any time. If a plate heat exchanger is brazed or welded, it’s very difficult and expensive to add plates after the fact. In general, gasketed plate heat exchangers are preferred in industrial settings where flexibility is paramount. Welded plate heat exchangers are rare due to the increased cost, but brazed plate heat exchangers are common in HVAC settings where replacement is easier than maintenance.

    Source : academy.paulmueller.com

    Shell & Tube Heat Exchangers

    Türkçe

    Home Page >  PRODUCTS > Shell & Tube Heat Exchangers >

    PRODUCTS

    Shell & Tube Heat Exchangers

    Air Cooled Heat Exchangers

    Serpentines Cooling Towers

    Shell & Tube Condensers

    Shell & Tube Evaporators

    Pressure Vessels Radiators Air Charge Cooler Economizer

    Water-Oil Heat Exchangers

    Unit Heaters Spiral Boiler Tubes

    Plate Heat Exchangers

    Stainless Steel Tubes

    Condensers & Evaporators

    Direct Contact Steam Condenser (Reboiler)

    Shell & Tube Heat Exchangers

    Shell & Tube Heat Exchanger

    GENERAL INFORMATION

    TECHNICAL INFORMATIONS

    TUBES TUBESHEET BAFFLES

    TIE RODS AND SPACERS

    CHANNELS (HEADS) PROMOTION FILM

    Tanıtım filmimizi izlemek için tıklayınız.

    CATALOGS

    Kataloglarımızı incelemek için tıklayınız.

    CONTACT FORM

    Formumuzu doldurarak görüş ve önerilerinizi bize iletebilirsiniz.

    Konuk Isı 2017 © All Rights Reserved.

    Web Design Grimor

    Source : www.konukisi.com

    Do you want to see answer or more ?
    James 11 month ago
    4

    Guys, does anyone know the answer?

    Click For Answer